Computer science notes: OSI 7 layers, VLAN, DHCP, NAT
OSI7 Layer
| Application (Layer 7) | Application services: HTTP, SMTP |
|---|---|
| Presentation (Layer 6) | Data is transformed: encoding / encryption / compression, etc. |
| Session (Layer 5) | Establishes / maintains / ends TCP / IP connections |
| Transport (Layer 4) | TCP / UDP |
| Network (Layer 3) | IP communication, routing |
| Data Link (Layer 2) | Ethernet, LAN card, MAC communication, error detection |
| Physical (Layer 1) | Protocols for network hardware transmission technology |
Application (Layer 7) - Application layer
-
Related to internet application services such as HTTP and SMTP
-
The layer closest to the user, acting as the interface
-
Handles information exchange between application processes
Presentation (Layer 6) - Presentation layer
-
The layer that decides how data is represented
-
Data encryption and decryption
Session (Layer 5) - Session layer
-
Provides interaction and synchronization between communicating devices
-
Manages data exchange in a connection session and recovery when errors occur
Transport (Layer 4) - Transport layer
-
Handles reliable and accurate end-to-end data transfer
-
Performs error detection and recovery, flow control, duplicate checks, and so on, to transfer data reliably and efficiently between sender and receiver
-
Uses port numbers to transfer data (TCP and UDP are the main protocols)
-
The data unit at the transport layer is the segment
Network (Layer 3) - Network layer
-
IP communication, routing
-
Manages sending data to other networks and communicates using IP addresses
-
Handles routing along the way when communicating from the source IP to the destination IP
-
When data is large, splits it, sends it, and reassembles it into the message
Data Link (Layer 2) - Data link layer
-
Related to Ethernet, MAC communication, error detection, and retransmission
-
The second layer of the OSI 7 layers, providing the functions and procedures for sending data between adjacent nodes
-
Detects and corrects errors that occur in the physical layer
-
Ethernet is the main protocol, and the equipment used is the switch
Physical (Layer 1) - Physical layer
-
The first layer of the OSI 7 layers, expressed as hardware
-
Defines the electrical and mechanical properties and the transmission media of network devices
-
Made up of communication devices, connectors, circuits that send and receive, and so on
-
The cable types mostly used are Coaxial, TP, and Fiber
-
Data is mostly measured in bit, KB, MB, GB, and TB
-
The capacity of physical layer equipment is usually described by Bandwidth, Throughput, and Backplane
VLAN
-
A technology that builds a logical, virtual LAN instead of a physical setup
-
Managed separately per broadcast domain to block unnecessary data
-
The LAN group can't change along with a host's physical move
-
No need to buy a physical switch when adding a new LAN
DHCP
-
DHCP is a protocol that dynamically assigns IP addresses to clients
-
Hosts whose IP changes often are easy to manage with DHCP
-
Can prevent failures caused by wrong IP settings
-
Can maximize efficiency by assigning an IP address only when there is a request
NAT
-
A technology that connects a private IP network and translates it into a routable public IP
-
The internal network setup can change without affecting the public IP range
-
Maintenance costs go down because public IPs no longer need to be assigned
- #Zerobase Frontend School